Buy a Sump Pump that will Not Burn Out

Diagram of a Properly Installed Submersible Sump Pump

A sump pump is a mechanical thing that has moving parts.  As with anything that has moving parts, they are prone to breaking or burning uout.  One of the most important considerations when looking for a sump pump that won't burn out quickly is to do your research.  Only buy one that has been designed to properly disperse the heat that is generated when the sump pump motor has been running hard for long periods of time.

Any sump pump that you choose should not have what is referred to as a "can" motor. "Can" motors are sump pump motors that have been mass-produced and are then shipped to the manufacturer in a metal casing. Those motors are then placed in a second sump pump casing.  The problem with this system is that there are now two layers around the motor which holds much more heat in and will cause the motor to run hotter.

Cast iron sump pumps better disperse the heat in your sump pump and prevent them from burning out as much as other designs.  The sump pump design should allow the heat that is generated by a sump pump to easily escape.  It it doesn't the housing will become distorted by the heat and will also affect the bearings. So, before you by a cast-iron sump pump, you want to make sure that at least the middle housing is cast-iron and not plastic or some other metal.  Be aware that just because a sump pump is advertised as being cast-iron doesn't mean that plastic was not used in the middle casing.

Wayne Sump Pumps On Amazon

Don't put up with water problems in your basement.


Check out the Wayne Sump Pumps listed on Amazon. 


Get great deals on dependable sump pumps.

Wayne CDUCAP995 3/4 HP Stainless Steel Sump pump

Do you need to solve a water problem?

Is your basement leaking?

Is your crawl space leaking?

Find great deals on Wayne sump pump at Amazon.com

Check out the model below:



Check out the great deals.

Do you have a leaky basement or crawl space? Consider installing a sump pump

Installing A Sump Pump

If you are living in a home that has water problems, you need to consider installing a sump pump to help alleviate the problem.

Water problems, if left unrepaired can cause a lot of problems over time. In a basement area, standing water prevents you from using that space unless you take the action of installing a sump pump. Water penetration can also damage your belongings that you have stored down in the basement area. If the area is finished, you risk ruining the drywall, furniture and electronics.

 

Once the drywall gets wet, mold can start to develop in the right conditions. If mold is allowed to grow unchecked, you could be in for some serious and very costly problems. You cannot begin to address the mold problem until you quit feeding the problem with water.

If you have water penetration in your crawl space, mold and fungus can begin to grow. In worse case scenarios, it can cause the supports and subfloor to deteriorate which again can lead to repairs that are expensive. Installing a sump pump would have been cheaper in the long run and would have saved you this aggravation. This area can also start to smell and that awful smell can seep into your living area.

 

You can also forget trying to sell a home with water problems because it is almost impossible. No one wants your “problem house” and you will have a hard time giving it away. So one way or another, you will be installing a sump pump to fix the water penetration problem.

 

Before installing your sump pump, you need to check a few things around the house and figure out how the water is getting in.

• Take a good look at the drainage around the perimeter of your home.
• How does the grade or dirt around the foundation look? Is it sloped so that water can drain away from the foundation or does it drain towards the foundation and pond there?
• Are there holes under the downspouts because your splashblocks are missing? These holes are next to the foundation and will hold water that will eventually seep into the basement or crawl space area.
• Do you have extenders on your downspouts so that water can be deposited three or four feet away from the home?
• Are your gutters full of debris? Gutters that don’t drain properly can allow water to overflow and pond around the foundation of the home.

 These are a few of the things that you and / or a contractor will need to take a look at before installing a sump pump. Any of these problems need to be corrected before installing a sump pump.

Whether you are considering installing a sump pump on your own or you just want to get some prices before you call a contractor check out these sump pumps.

 

 

 

Wayne CDU800 1/2 HP Cast Iron Submersible

Are you having water problems?
Does your basement leak every time it rains?

You need to install a Wayne sump pump.

This Wayne model is affordable.  Check it out.

Wayne CDI980 3/4 HP Stainless Submersible Sump Pump

Is your basement or crawl space leaking?

Fix the problem with a Wayne sump pump.  There are many different models in a variety of price ranges.

Get A Great Deal on a Wayne CUU980 3/4 HP Stainless Submersible Sump Pump

Check out the great deal sbelow: